User Manual
Table Of Contents
- Dishwasher
- en-us
- Table of contents
- 1 IMPORTANT SAFETY INSTRUCTIONS
- 2 Preventing material damage
- 3 Environmental protection and energy-saving
- 4 Familiarizing yourself with your appliance
- 5 Dishwasher Cycles
- 6 Options
- 7 Features
- 8 Before using for the first time
- 9 Water softening system
- 10 Rinse aid system
- 11 Detergent
- 12 Dishware
- 13 Basic Operation
- 13.1 Protection against unintentional operation
- 13.2 Opening the appliance door
- 13.3 Switching on the appliance
- 13.4 Setting a cycle
- 13.5 Setting options
- 13.6 Setting the electronic delay time
- 13.7 Starting the wash cycle
- 13.8 Interrupting the wash cycle
- 13.9 Terminating the wash cycle
- 13.10 Switching off the appliance
- 14 Basic settings
- 15 Home Connect™
- 16 Cleaning and maintenance
- 17 Troubleshooting
- 18 Transportation, storage and disposal
- 19 Customer service
- 20 Technical specifications
- 21 Statement of Limited Product Warranty
en-us Basic settings
34
Basic setting Display
text
Selection Description
infoLight® I01
1
I00 - I01 Switch InfoLight on or off.
While the program is run-
ning, a spot of light is pro-
jected onto the floor below
the appliance door. This
light will not be visible if
the appliance is installed
at eye level with the cabi-
net front fitted flush. If the
appliance door is not com-
pletely closed, the spot of
light will flash. The pro-
gram has ended when the
spot of light is no longer
visible on the floor.
Level "I00" switches Info-
Light off.
Signal volume b02
1
b00 - b03 Adjusting the signal vol-
ume.
Level "b00" switches the
signal tone off.
Wi-Fi Cn0
1
Cn0 - Cn1 Switch the wireless net-
work connection on or off.
Level "Cn0" switches the
wireless network connec-
tion off.
Remote Start rc1
1
rc0 - rc2 Activate or deactivate .
The following settings are
possible:
¡ With the setting "rc0",
the option is perma-
nently deactivated.
¡ With the setting "rc1",
the option can be se-
lected via the button.
¡ With the setting "rc2",
the option is perma-
nently activated.
Factory setting rE Starting with
YES
Confirming
with
Restore changed settings
to the factory settings.
The settings for initial use
must be configured.
1
Factory setting (may vary according to model)