Interactive User Manual
Table Of Contents
- Dishwasher
- en-us
- Table of contents
- 1 IMPORTANT SAFETY INSTRUCTIONS
- 2 Preventing material damage
- 3 Environmental protection and energy-saving
- 4 Familiarizing yourself with your appliance
- 5 Dishwasher Cycles
- 6 Options
- 7 Features
- 8 Before using for the first time
- 9 Water softening system
- 10 Rinse aid system
- 11 Detergent
- 12 Dishware
- 13 Basic Operation
- 13.1 Protection against unintentional operation
- 13.2 Opening the appliance door
- 13.3 Switching on the appliance
- 13.4 Setting a cycle
- 13.5 Setting options
- 13.6 Setting the electronic delay time
- 13.7 Starting the wash cycle
- 13.8 Interrupting the wash cycle
- 13.9 Terminating the wash cycle
- 13.10 Switching off the appliance
- 14 Basic settings
- 15 Home Connect™
- 16 Cleaning and maintenance
- 17 Troubleshooting
- 18 Transportation, storage and disposal
- 19 Customer service
- 20 Technical specifications
- 21 Statement of Limited Product Warranty
Troubleshooting en-us
43
Issue Cause and troubleshooting
A different error
code appears in the
display window.
E:01-00 to E:90-10
A technical fault is present.
1. Press .
2. Pull out the power cord plug of the appliance or
switch off the breaker.
3. Wait at least 2minutes.
4. Insert the power cord plug of the appliance in a
power outlet or switch on the breaker.
5. Switch the appliance on.
6. If the problem occurs again:
‒ Press .
‒ Turn off the water faucet.
‒ Pull out the power cord plug.
‒ Contact customer service →
Page53
and
give the error code.
Dishware is not dry. No rinse aid used or dosage set too low.
1.
Add Rinse aid →
Page24
.
2. Set the amount of rinse aid to be dispensed.
→
"Setting the amount of rinse aid", Page25
Cycle or cycle option has no drying phase, or dry-
ing phase is too short.
▶
Select a wash cycle with drying. →
Page15
Some option buttons decrease the drying re-
sult.
Water collects in recesses of dishware or silver-
ware.
▶
Position dishware at an angle where possible.
The combined detergent used has a poor drying
performance.
1. Use rinse aid to improve drying performance.
2. Use a different combined detergent with a bet-
ter drying performance.
Extra Dry not activated to improve drying perfor-
mance.
▶
Activate Extra Dry.