Data Sheet

ManualsBrandsBosch ManualsFiber Optic TransmissionSmall Form-factor Pluggable Optical Interface

Video | Fiber Optic Media Converters

Fiber Optic Media Converters

www.boschsecurity.com

u Utilizes Small Form-factor Pluggable (SFP) modules

u Multi-mode and single-mode modules available

u Supports distances up to 20 km (12.4 miles)

u Surface mount or rack mount capability

The Bosch fiber optic Media Converter series are

designed to transmit 10/100 Mbps Ethernet signals

over fiber optic cable using Small Form-factor

Pluggable (SFP) modules. These fiber optic media

converter devices can be used to transmit Ethernet

data well beyond the 100 m limit of copper-based

media and provides a secure, EMI/RFI free

transmission path.

The media converter units are designed to accept

10/100 Mbps SFP modules. The SFP modules are

ordered separately to meet user requirements for

mode type, distance and type of optical connector.

Available offerings include multi-mode fiber (MMF) or

single-mode fiber (SMF) models with a single SC

connector or dual-fiber with an LC connector.

System overview

VG4-SFPSCKT

The VG4-SFPSCKT is a unique media converter module

for use with VG4 series AutoDomes incorporating the

Ethernet (TCP/IP) Communications Module, as well as

with MIC Series 550, 550IR, and 612 cameras. This

media converter module is designed to accept any of

the 10/100 Mbps SFP modules described below.

The media converter module along with the SFP

module is user installed directly into the power supply

box of the AutoDome camera or of the MIC camera to

provide an integrated fiber optic solution. Refer to the

Installation Guide that accompanies the VG4-SFPSCKT

for detailed installation instructions.

CNFE2MC/IN

The CNFE2MC/IN is a media converter device designed

to transmit and receive 10/100 Mbps Ethernet data

over optical fiber using SFP modules. This head-end

device is supplied in an enclosure that can be surface

mounted or rack mounted using the optional C1-IN

rack mount card cage. The unit does not require in-

field adjustments, and provides automatic MDI/MDI-X

crossover.

SFP Modules

The selection of Small Form-factor Pluggable (SFP)

modules provides the fast Ethernet optical interface

when using the VG4-SFPSCKT or the CNFE2MC/IN

media converters. These interchangeable SFP modules

are available for use with MMF or SMF optical fiber.

The optical fiber SFP modules are available as one and

two fiber versions. They also are available with LC or

SC optical connectors.

Summary of content (5 pages)

PAGE 1
Video | Fiber Optic Media Converters Fiber Optic Media Converters www.boschsecurity.com u Utilizes Small Form-factor Pluggable (SFP) modules u Multi-mode and single-mode modules available u Supports distances up to 20 km (12.4 miles) u Surface mount or rack mount capability The Bosch fiber optic Media Converter series are designed to transmit 10/100 Mbps Ethernet signals over fiber optic cable using Small Form-factor Pluggable (SFP) modules.
PAGE 2
| Fiber Optic Media Converters The VG4-SFPSCKT and CNFE2MC/IN media converters accept the following SFP modules: Module Fiber Type Optical Interface SFP-2 MMF Duplex LC SFP-3 SMF Duplex LC SFP-25 MMF Single SC SFP26 MMF Single SC The SFP-25/SFP-26 modules are counterparts; if you use one in the VG4-SFPSCKT module, then you must use the other in the CNFE2MC/IN head-end unit. Refer to the chart below for the acceptable combinations.
PAGE 3
| Fiber Optic Media Converters • Right side, Flashing Green Data is present • Right side, Off No data is present • Left side, Amber Link is valid at 100 MB • Left side, Off If the right side is flashing green, link is valid at 10 MB • No LED lit Missing the network cable, defective network cable or the other end of the network cable is not connected • No LED lit Power Indicates a loss of fiber connection Green: power is supplied None: no power supplied • Green Power is supplied • No LED lit
PAGE 4
| Fiber Optic Media Converters Dimensions (LxWxH) • SFP-2, SFP-3 55.5 x 13.5 x 8.5 mm (2.2 x 0.5 x 0.3 in.) • SFP-25, SFP-26 63.8 x 13.5 x 8.5 mm (2.5 x 0.5 x 0.3 in.) Weight (all SFP modules) 0.23 kg (.05 lb) Output Voltage 9 VDC ± 5% at 6.5 A at 75°C (167°F) Fusing 1.25 A slow blow (rack power supply) (plug-in modules individually electronically fused) Power Indicator Red LED AC Line Cord Detachable, IEC-connected. US, European, and UK power cords supplied.
PAGE 5
| Fiber Optic Media Converters SFP‑26 Small Form‑factor Pluggable Optical Interface SFP Fiber Optic Module, Multi-mode, 1550/1310 nm, 2 km (1.2 miles), 1 SC connector Order number SFP-26 Accessories C1-IN Rack Mount Card Cage for CNFE2MC EIA 19-in. rack for CNFE2MC, 120-230 VAC Order number C1-IN C1‑BP Blank Panel for C1 Rack Blank panel for C1 rack mount card cage, 1 slot width (1 in.) Order number C1-BP Represented by: Americas: Bosch Security Systems, Inc.