Setup guide
Table Of Contents
- Agencies
- About This Manual
- General Information
- Safety Symbols and Their Meanings
- Conflicts with Other Documents
- Table of Contents
- Figures
- Tables
- _
- 1.0 System Overview
- 1.1 System Components Description
- 1.2 Compatible Parts
- 1.3 System Components and Specifications
- 1.4 Transmitters
- 1.5 Cables
- 1.6 Batteries
- 1.7 Enclosures
- 1.8 Miscellaneous
- 2.0 Equipment Estimation
- 3.0 Installation Instructions
- 4.0 System Power-up and Debug
- 5.0 Testing and Troubleshooting
- _
- Appendix
Security Escort | Installation and Setup Guide | 3.0
Installation Instructions
EN | 27
Bosch Security Systems | 1/09 | 33831E
Figure 5: General Wiring Diagram
1 - Wiring guidelines*
2 - Wiring guidelines*
3 - Wiring guidelines*
4 - Wiring guidelines*
5 - Wiring guidelines*
6 - Wiring guidelines*
7 - Outdoor receiver
8 - Indoor receiver
9 - Siren/Strobe
10 - Transponder
11 - SE485 Interface**
12 - Central console computer # 1
(primary)
13 - Alert unit
14 - Printer
15 - Central console computer # 2
(back-up)
16 - ProxLink
* See Table 7 for wiring details
** SE485 Interface units are only needed if the length of the cable between the console
and the ProxLink is greater than 15 m
(50 ft.).