Technical data

Safety
Danger!
Battery
Consequences
– Risk of shock, if N, L1 or xx is connected incorrectly! For operation safety, the ground
terminals must be connected.
1. Be careful when connecting the positive (red) wire and the "BATT +" port of the AMAX
panel. If short-circuiting with the "BATT +" port of the AMAX panel or the housing, electric
arc will occur!
2. To remove the battery from the AMAX panel, first disconnect the positive wire of the
battery.
3. Be careful when replacing the battery. If the battery is not replaced correctly there is risk
of fire explosion or burning.
Danger!
Electrostatic-Sensitive Components
Consequences
– As electrostatic-sensitive components (ESDs) are included in PCBs, anti-static steps
should be followed and they should be carefully installed.
– Before installing the alarm AMAX panel, the static electricity possibly carried should be
discharged by contacting the grounding terminal of the AMAX panel.
Notice!
Battery
Consequences
1. Only use a non-spillable battery.
2. The battery must be recycled.
3. Replace the battery every 3-5 years under normal conditions of use.
4. Place a label with change date on the battery.
Notice!
Total electric current
The total electric current for all connected modules and devices must be ≤ 2000mA.
2
6 en | Safety AMAX 2100 / 3000 / 4000
2014.03 | 01 | Quick Start Guide Bosch Sicherheitsysteme GmbH