Manualshelf

Technical data

ManualsBrandsBosch ManualsMusical equipmentRFRC-OPT
11121314151617181920
Figure 5.5: Checking the System Options
5. Make sure that the value for the Installer code parameter is the same as currently
programmed in the AMAX panel. The value is 1234, if the firmware of the AMAX panel was
upgraded or the AMAX panel has factory settings.
Establishing a Direct Connection
1. Select the Link tab to establish a connection between the A-Link Plus program and the
AMAX panel.
16
en | Configuration AMAX 2100 / 3000 / 4000
2014.03 | 01 | Quick Start Guide Bosch Sicherheitsysteme GmbH