Technical data

Figure 5.4: Configuring the Control Panel
2. Select AMAX4000 as Control Panel Type.
3. Make sure that the value under Subscribed Number for Destination 1 is the same as
currently programmed in the AMAX panel as Receiver 1. The value is 000000, if the
firmware of the AMAX panel was upgraded or the AMAX panel has factory settings.
4. Select the System Options item in the same tab.
AMAX 2100 / 3000 / 4000
Configuration | en 15
Bosch Sicherheitsysteme GmbH Quick Start Guide 2014.03 | 01 |