Technical data

TSplus Carousel Basic Equipment Guide R980 500 388 (6.2010)
Bosch Rexroth Corporation
27
Checking the Motor Rotation
16. Wire the motor and verify
correct motor rotation
before connecting the
chain (See page 29). Use
a qualified technician who
is familiar with the control
system during the initial
step. Although subsequent
step is pictured with the
guards removed for ease in
viewing, the guards must be
installed before the drive is
operated.
17. The drive sprocket must
rotate counter clockwise
as indicated on the module
with an arrow sticker
(Fig 34). Make sure the
transport chain will be
pulled into the drive (See
Fig. 28 on page 24).
18. Re-attach the drive chain
and release the chain
tensioner loosening the
screws (Reference steps on
page 23).
19. Reinstall the side guards
(See Fig. 23 on page 23).
Fig. 34
CAUTION!
LOCK OUT all power supplies before
beginning the next step (page 4).
WARNING!
Guards must be attached before
the conveyor drive is in operation.
Fauilure to attach guards may result
in serious injury.