Technical data

Bosch Rexroth Corporation
12
R980 500 388 (6.2010) TSplus Carousel Basic Equipment Guide
Cross Links
The 45x60 strut profile cross links
provide extra structural support
and ensure that the TSplus conveyor
section has a uniform guiding width
(Fig. 8). Cross links must be fastened
to the conveyor section profiles at a
maximum of 2-meter intervals along
the conveyor. The length of the cross
links is determined by the width of the
workpiece pallet or line width.
Links
Connection Links
The conveyor section is extended
with the help of connection links,
with one per conveyor rail for each
conveyor-section joint. The connec-
tion link consists of the following
parts (Fig. 7):
1. Connecting link with four
M8 threaded holes
2. M8 hex bolts with
lockwashers and backing
washers (Qty. 4)
2
1
Fig. 7
Cross Link
Fig. 8