Technical data

2 609 002 813 | (1.10.08) Bosch Power Tools
40 | English
Temperature Dependent Overload Protection
When using as intended for, the power tool cannot be
subject to overload. When the load is too high or the al-
lowable battery temperature of 70 °C is exceeded, the
electronic control switches off the power tool until the
temperature is in the optimum temperature range again.
Protection Against Deep Discharging
The Li-ion battery is protected against deep discharging
by the “Electronic Cell Protection (ECP)”. When the bat-
tery is empty, the machine is switched off by means of a
protective circuit: The inserted tool no longer rotates.
Working Advice
f Apply the power tool to the screw only when it is
switched off. Rotating tool inserts can slip off.
Maintenance and Service
Maintenance and Cleaning
f Before any work on the machine (e. g., maintenance,
tool change, etc.) as well as during transport and
storage, set the rotational direction switch to the
centre position. Unintentional actuation of the On/Off
switch can lead to injuries.
f For safe and proper working, always keep the ma-
chine and ventilation slots clean.
OBJ_BUCH-781-002.book Page 40 Wednesday, October 1, 2008 11:03 AM