Technical data

1 609 929 N20 | (13.12.07) Bosch Power Tools
14 | English
Intended Use
The machine is intended for dry sanding and pol-
ishing of wood, filler and coated surfaces. It is es-
pecially suitable for profiles, corners or hard to
reach locations.
Product Features
The numbering of the product features refers to the
illustration of the machine on the graphics page.
1 On/Off switch
2 Dust box, complete (micro filtersystem)
3 Sanding plate
4 Sanding sheet*
5 Extraction outlet
6 Filter element (micro filtersystem)
7 Vacuum hose*
*The accessories illustrated or described are not in-
cluded as standard delivery.
Technical Data
Noise/Vibration Information
Measured values determined according to
EN 60745.
Typically the A-weighted noise levels of the prod-
uct are: Sound pressure level 83 dB(A); Sound
power level 94 dB(A). Uncertainty K =3 dB.
Wear hearing protection!
Vibration total values (triax vector sum) deter-
mined according to EN 60745:
Vibration emission value a
h
=6.5 m/s
2
, Uncertain-
ty K <1.5 m/s
2
.
The vibration emission level given in this informa-
tion sheet has been measured in accordance
with a standardised test given in EN 60745 and
may be used to compare one tool with another. It
may be used for a preliminary assessment of ex-
posure.
The declared vibration emission level represents
the main applications of the tool. However if the
tool is used for different applications, with differ-
ent accessories or poorly maintained, the vibra-
tion emission may differ. This may significantly
increase the exposure level over the total work-
ing period.
An estimation of the level of exposure to vibra-
tion should also take into account the times
when the tool is switched off or when it is run-
ning but not actually doing the job. This may sig-
nificantly reduce the exposure level over the total
working period.
Identify additional safety measures to protect the
operator from the effects of vibration such as:
maintain the tool and the accessories, keep the
hands warm, organisation of work patterns.
Declaration of Conformity
We declare under our sole responsibility that the
product described under “Technical Data” is in
conformity with the following standards or
standardization documents: EN 60745 according
to the provisions of the directives 2004/108/EC,
98/37/EC (until Dec. 28, 2009), 2006/42/EC
(from Dec. 29, 2009 on).
Technical file at:
Robert Bosch GmbH, PT/ESC,
D-70745 Leinfelden-Echterdingen
07.11.2007, Robert Bosch GmbH, Power Tools Division
D-70745 Leinfelden-Echterdingen
Multi Sander PSM 80 A
Article number
3 603 C54 0..
Rated power input
W80
No-load speed
rpm 11250
No-load orbital stroke rate
opm 22500
Sanding sheet surface
cm
2
104
Orbit diameter
mm 1.4
Weight according to
EPTA-Procedure 01/2003
kg 0.9
Protection class
/II
The values given are valid for nominal voltages [U] of
230/240 V. For lower voltage and models for specific
countries, these values can vary.
Please observe the article number on the type plate of
your machine. The trade names of the individual ma-
chines may vary.
Dr. Egbert Schneider
Senior Vice President
Engineering
Dr. Eckerhard Strötgen
Head of Product
Certification
OBJ_DOKU-2339-002.fm Page 14 Thursday, December 13, 2007 2:40 PM