Technical data

5-64 Bosch Rexroth AG | Electric Drives and Controls Rexroth VCP-Operating Concept | R911305038 / 01
Standard Mode
RepoutSelectGroup
RepoutSelectTime
RepoutGroup
Function Sets the group numbers whose messages are displayed.
Data type Numeric
Representation
type
Positive decimal number, alphanumeric, selection text, selection im-
age, hexadecimal number, binary number
Configurable val-
ues
0x01h
to
0x80h
Group number 1 to 8
Each group is represented by one bit of a byte. A logical '1' in bit 0 acti-
vates group1, in bit 1 activates group2 and so on.
The settings for a message field override the settings for this system
variable! To prevent the settings in the operating device from being
overridden, you must activate the Global Settings function for the mes-
sage field.
Function Specifies the time rule according to which messages are displayed.
Data type Numeric
Representation
type
Positive decimal number, alphanumeric, selection text, selection im-
age, hexadecimal number, binary number
Configurable val-
ues
1 All messages in chronological order.
2 All acknowledged messages that do not have the attribute "Disap-
pear".
3 All messages that do not have the attribute "Acknowledged".
Function Allows you to output a group number along with the message.
Data type Numeric
Representation
type
Positive decimal number, alphanumeric, selection text, selection im-
age, hexadecimal number, binary number
Configurable val-
ues
0OFF
1ON