Technical data

5-50 Bosch Rexroth AG | Electric Drives and Controls Rexroth VCP-Operating Concept | R911305038 / 01
Standard Mode
ComDefaultA
ComTimeout
ComRetryTimeout
Function Activates the interface parameters for SER1.
Data type Numeric
Representation
type
Positive decimal number, alphanumeric, selection text, selection im-
age, hexadecimal number, binary number
Configurable val-
ues
0Inactive
1 Activates the interface parameters entered by the operator.
2 Activates the interface parameters that were specified in the pro-
gramming software.
Function Sets the timeout watchdog time for SER1.
Data type Numeric
Representation
type
Positive decimal number, alphanumeric, selection text, selection im-
age, hexadecimal number, binary number
Configurable val-
ues
0 No timeout watchdog (Initial state)
1 to
65535
Timeout watchdog time in ms
Function Sets the waiting time (delay) after which another connection setup
is attempted for SER1. This time period allows to span the time pe-
riod required for the PLC-specific power-up phase, thereby prevent-
ing error messages from being generated.
Data type Numeric
Representation
type
Positive decimal number, alphanumeric, selection text, selection im-
age, hexadecimal number, binary number
Configurable val-
ues
0 to
65535
Waiting time in ms