Technical data

R911305038 / 01 | Rexroth VCP-Operating Concept Electric Drives and Controls | Bosch Rexroth AG 5-39
Standard Mode
ground and background colors change at specific intervals. The
attribute Flashing cannot be displayed in the programming software.
The result only appears in the operating device.
5.5.12.4 Underline
Variables with the attribute Underline are displayed with a line under
the entire variable value.
5.5.12.5 Invisible
The attribute Invisible is only evaluated together with a control vari-
able. In all other cases, the attribute Invisible results in an error mes-
sage during compilation, and no S3 file is generated.
Static texts and one-off variables (variables that are output only once)
with the attribute Invisible are not output.
Cyclical variables with the attribute Invisible are overwritten with
blanks. This erases any existing obsolete value on the screen.
If background images and cyclical variables are being used simulta-
neously, the background image is not updated!
5.5.12.6 Non-Editable
The Non-editable attribute selectively prevents variable values from
being changed. The system then only outputs the variable value one-
off or cyclically.
You can only use the Non-Editable attribute in conjunction with a con-
trol variable.
Regarding input variables, note that the operator cannot enter the range
of values for the attribute Invisible. If an input value is in the area of the
attribute Invisible, the edit process is not started. The operator then has
no possibility to change the value again.