Technical data

5-38 Bosch Rexroth AG | Electric Drives and Controls Rexroth VCP-Operating Concept | R911305038 / 01
Standard Mode
5.5.11 Variable Type
5.5.11.1 Standard
The standard type is the variable type most frequently used to display
decimal numbers. The maximum length depends on the data type. The
significance of the displayed digits increases from right to left. There
are no blanks between the digits.
5.5.11.2 BCD Number
A BCD number must be saved in the controller in BCD format. The
operating device can interpret and display up to eight digits. The signif-
icance of the displayed digits increases from right to left. There are no
blanks between the digits. The value can be displayed with leading
zeros.
5.5.12 Attributes (Static or Dynamic)
5.5.12.1 Global
Variables with the attribute Global:
– Appear in all languages for a project
– Appear in all masks with the same name
– Appear in the same position
5.5.12.2 Inverse
Variables with the attribute Inverse are displayed so that the fore-
ground and background colors are swapped.
5.5.12.3 Flashing
Variables with the attribute Flashing are displayed so that the fore-
Significance 10
3
10
2
10
1
10
0
10
-1
10
-2
Displayed 123,45D 012345
Significance 10
4
10
3
10
2
10
1
10
0
Displayed 1234D 01234
If you change the parameters of these variables, the changes apply to
all masks with the same name and to all languages for the project.