Technical data

R911305038 / 01 | Rexroth VCP-Operating Concept Electric Drives and Controls | Bosch Rexroth AG 5-37
Standard Mode
in the selection text field of the mask.
The maximum amount of entries in the article list is 255 items.
Marking an Artikel as Active
By means of the DIN-Measurement bus service Report Current Arti-
cle you can mark an article of the list as active. The service contains
the article number as parameter.
The article marked as active is not displayed in a selection text field
used to delete article data from the controller.
After a cold or warm boot or after deleting the active entry in the article
list no article is marked as active.
Access on the Article List
The article list serves as data base for selection fields in which you
select the articles stored in the controller.
To parameterize the selection field in the programming software you
must select „spec. selection“ as type of selection. A dialog for entering
the customer identity appears. Please enter the code Bosch in this dia-
log.
Next an additional dialog appears where you can select whether a
selection text field is set-up with a complete article list (general article
selection) or an article list without the active marked article (article
selection when deleting).
Entering the values and text items for the selection text field is not nec-
essary, because these data is delivered by the artice list.
Selecting an article at the small operator terminal is performed by the
"+" and "-" keys and is acknowledged by the enter key. The corre-
sponding article number is then transferred to the controller.
If a data set must be copied to another address before you can con-
tinue working, the access can be temporarily denied by means of the
PLC handshake bit.
Article Administration (delete)
Deleting an entry in the article list is performed by means of the DIN-
Measurement bus service Delete entry in article list. The service con-
tains the article number as parameter.
Deleting the whole content in the article list is performed by means of
the DIN-Measurement bus service Delete all entries in article list.