Technical data

R911305038 / 01 | Rexroth VCP-Operating Concept Electric Drives and Controls | Bosch Rexroth AG 5-35
Standard Mode
5.5.9.2 With Enter
The operator must press the Enter key to transfer the value of the vari-
ables from the operating device to the controller.
5.5.9.3 With +, –, or Enter
Each time the operator presses the Plus and Minus keys, he transfers
the incremented or decremented value to the controller. If the operator
uses the 0 to 9 keys to enter the value, he must then press the Enter
key.
5.5.9.4 For all changes
The operator can change the value of a variable only with the Plus and
Minus keys. The changed value is transferred to the controller each
time you select the Plus and Minus keys.
5.5.10 Access Type
5.5.10.1 Normal
Use the access type Regular for accessing selection text, or selection
image variables for projects that do not use any variant options. The
system then displays for selection all entries in a text list or an image
list.
5.5.10.2 Selective
Use the access type Selective to only display the selection texts or
selection images that are “released“ using a controller variable. Each
bit of the controller variable represents an entry in the text or image list.