Technical data

R911305038 / 01 | Rexroth VCP-Operating Concept Electric Drives and Controls | Bosch Rexroth AG 5-33
Standard Mode
1. Inserting the variable values:
Fig. 5-25: Inserting the variable values in the formula
2. Solving the equation:
Fig. 5-26: Solving the equation
3. Solving the equation for x:
Fig. 5-27: Solving the equation for x
5.5.9 Communication Definition
5.5.9.1 PLC Handshake
Select the attribute PLC Handshake to inform the controller that the
values of the subsequent controller variables of the current mask
are to be changed.
To do this, you must:
– Create a variable for the Read Coordination byte AND
– Create a variable for the polling area
The attribute PLC Handshake allows you to:
– Create your own recipe management system
– Inform the controller that a specific variable value will be changed
y - (-4096)
x - 0
=
4096 - (-4096)
100 - 0
y + 4096
x
=
4096 + 4096
100
100 y + 409600 = 8192 x
100
8192
409600
8192
y +x =
100
8192
y + 50
x =
Factor
Summand
Divisor
See chapter “Read Coordination Byte“ on page 5-119.
See chapter “Write Coordination Byte“ on page 5-121.