Technical data

5-26 Bosch Rexroth AG | Electric Drives and Controls Rexroth VCP-Operating Concept | R911305038 / 01
Standard Mode
In the Representation of Message area, you can specify data that can
be changed when the operating device is running.
Global settings: If this parameter is active, default settings from the system parameters
are used for the message system.
Message group: The system outputs the group identifier before the message text.
Message number: The system outputs the message number before the message text.
Message date: The system outputs today’s date before the message text. In the date,
the year can either be output as two digits or four digits. The value of
the date is frozen with the message.
Time of message: The system outputs the time before the message text. The value of the
date is frozen with the message.
The maximum number of lines per message specifies that only the
number of lines entered here will be displayed. The standard value is
the maximum value of 255 lines.
In the Time Period area, you can specify the time period from which
messages will be displayed.
Chronicle: The system displays all messages.
Old list: The system only displays acknowledged messages that do not have
the status Disappeared.
In the Group Assignment area, you can select whether you would like
to display message groups in the current message field, and if you
would, specify the corresponding groups. Next to the group number,
the system also displays the group identifier that you set up. Select the
check box next to the group number, to select the required group. Any
number of combinations are possible. If you do not select any check
box, the system can display all groups.
The Font area specifies the character set used to display all elements
of a message field on the operating device. To display all elements of a
message field in another font, click the New button.
Recipe Field
The Recipe field classifies the area in a mask used to display recipes.
Select the Recipe Field icon in the toolbar and in the mask select the
area where recipes will be displayed. This area is displayed as a rect-
angle. The recipe field is marked with the letter R on the left edge of the
rectangle. You can use the sizing handles to change the height of the
area. You cannot change the width of the area.
Select the name of the recipe for which you want to set up a recipe
field.