Technical data

R911305038 / 01 | Rexroth VCP-Operating Concept Electric Drives and Controls | Bosch Rexroth AG 5-21
Standard Mode
Example for displaying a binary number with or without blank spaces:
5.5.3.8 Bars
You can use the representation type Bars only to output variable val-
ues.
The variable values are refreshed either cyclically or one time, when
the mask is opened.
0100 Blanks = 0
0100 Blanks = 1
0100Blanks = 2
Key Function
0 and 1 Enters the numbers 0 and 1.
2 to 9 No function
Decimal point No function
Cursor Right Moves the cursor one position to the right.
Cursor Left Moves the cursor one position to the left.
Cursor Up Moves the cursor to the next highest, editable vari-
able in the display, and selects it. If the cursor is al-
ready positioned at the top-level variable, the low-
est-level variable is selected.
Cursor Down Moves the cursor to the next lowest, editable vari-
able in the display, and selects it. If the cursor is al-
ready positioned at the lowest-level variable, the
top-level variable is selected.
Plus Enters the characters 0 and 1.
Minus Enters the characters 0 and 1.
Delete No function
Fig. 5-14: Key functions for binary numbers