Technical data

5-20 Bosch Rexroth AG | Electric Drives and Controls Rexroth VCP-Operating Concept | R911305038 / 01
Standard Mode
Example: A hexadecimal number:
5.5.3.7 Binary Number
You use binary numbers to display individual bits, bytes, words, and
Lwords. Select the number of bits and blank spaces for display. Both
values are used to determine the entire field length.
There are a maximum of 32 bits for each variable. There can be no
more than 255 blank spaces between the bits.
The significance of the displayed digits can be displayed in ascending
order from either left to right or from right to left.
16
4
16
3
16
2
16
1
16
0
Significance
0 E 4 5 A Displayed =
0E45AH
Key Function
0 to 9 Enters the numbers 0 to 9.
Decimal point No function
Cursor Right Moves the cursor one position to the right.
Cursor Left Moves the cursor one position to the left.
Cursor Up Moves the cursor to the next highest, editable variable in
the display, and selects it. If the cursor is already posi-
tioned at the top-level variable, the lowest-level variable
is selected.
Cursor Down Moves the cursor to the next lowest, editable variable in
the display, and selects it. If the cursor is already posi-
tioned at the lowest-level variable, the top-level variable
is selected.
Plus Enters the characters 0 to 9 and A to F in ascending or-
der.
Minus Enters the characters 0 to 9 and A to F in descending or-
der.
Delete No function
Fig. 5-13: Key functions for hexadecimal numbers