Technical data

R911305038 / 01 | Rexroth VCP-Operating Concept Electric Drives and Controls | Bosch Rexroth AG 5-19
Standard Mode
There are no blanks between the characters. In the controller, the vari-
able appears in special floating point formats, for example, IEEE. Only
some controllers support floating point numbers.
5.5.3.6 Hexadecimal Number
The significance of the displayed digits increases from right to left.
Hexadecimal numbers are displayed with the digits 0 to 9 and A to F in
upper case, and with leading zeros.
The representation refers to the data types byte, word, and LWord. The
maximum length is 8 digits. There are no blanks between the charac-
ters.
Key Function
0 to 9 Enters the numbers 0 to 9.
Decimal point Enters the decimal point.
Cursor Right Moves the cursor one position to the right.
Cursor Left Moves the cursor one position to the left.
Cursor Up Moves the cursor to the next highest, editable variable in
the display, and selects it. If the cursor is already posi-
tioned at the top-level variable, the lowest-level variable
is selected.
Cursor Down Moves the cursor to the next lowest, editable variable in
the display, and selects it. If the cursor is already posi-
tioned at the lowest-level variable, the top-level variable
is selected.
Plus 1st case: Variable is selected. The value is deleted and
you can enter a new value.
2nd case: Cursor was moved within a positive value. The
value is not changed.
3rd case: Cursor was moved within a negative value. The
negative sign for the value is deleted.
Minus 1st case: Variable is selected. The value is deleted, and
a negative sign is inserted at the least-significant position.
You can enter a new value.
2nd case: Cursor was moved within a positive value. A
negative sign is placed in front of the value.
3rd case: Cursor was moved within a negative value. The
value is not changed.
Delete Deletes the position where the cursor is located, and also
deletes the sign.
Fig. 5-12: Key functions for floating point numbers