Technical data

5-14 Bosch Rexroth AG | Electric Drives and Controls Rexroth VCP-Operating Concept | R911305038 / 01
Standard Mode
Example for a BCD number:
It is important that you take particular care when inputting BCD num-
bers.
You can enter numeric values as standard decimal numbers using the
Standard editor. You can also increment or decrement each individual
digit of the BCD value using the Mixmode editor. You can only use the
Increment editor to make incremental changes to individual digits in a
value with decimal transfer. This corresponds to the procedure used by
a decade switch.
For scaled variables, the value in the controller changes by +/- 1. How-
ever, the value displayed also depends on the scaling specified.
10
3
10
2
10
1
10
0
10
-1
10
-2
Significance
012345Displayed =
1234
D
Key Function
0 to 9 1. Standard and Mixmode - Enter the numbers 0 to 9
2. Increment - No function
Decimal point Enters the decimal point.
Plus 1. Standard - No function
2. Mixmode and Increment - Increments the value at the cursor and influences
the more significant digits when the range of values is exceeded.
Minus 1. Standard - No function
2. Mixmode and Increment - Decrements the value at the cursor and influences
the more significant digits when the range of values is not reached.
Cursor Right Moves the cursor one position to the right.
Cursor Left Moves the cursor one position to the left.
Cursor Up Moves the cursor to the next highest, editable variable in the display, and selects
it. If the cursor is already positioned at the top-level variable, the lowest-level vari-
able is selected.
Cursor Down Moves the cursor to the next lowest, editable variable in the display, and selects
it. If the cursor is already positioned at the lowest-level variable, the top-level vari-
able is selected.
Delete 1. Standard and Mixmode - Variable is selected: The value is deleted and you can
enter a new value.
2. Standard and Mixmode - Cursor was moved within the value: The character is
deleted and the more significant digits are moved to the left.
3. Increment - No function
Fig. 5-7: Key functions for decimal numbers of the type BCD