Technical data

R911305038 / 01 | Rexroth VCP-Operating Concept Electric Drives and Controls | Bosch Rexroth AG 5-13
Standard Mode
Example: A decimal number with two decimal places.
BCD Format
The significance of the displayed digits increases from right to left. You
can display integers as BCD numbers with leading zeros.
The representation refers to the data types bit, byte, word, and Lword.
The maximum length is 8 digits. There are no blanks between the char-
acters. The variable appears in BCD format in the controller.
For one byte, the range of values spans from 00 to 99.
10
3
10
2
10
1
10
0
10
-1
10
-2
Significance
012345Displayed =
123,45
Key Function
0 to 9 Enters the numbers 0 to 9.
Decimal point Enters the decimal point.
Cursor Right Moves the cursor one position to the right.
0 to 9 Enters the numbers 0 to 9.
Decimal point Enters the decimal point.
Cursor Right Moves the cursor one position to the right.
Cursor Left Moves the cursor one position to the left.
Cursor Up Moves the cursor to the next highest, editable variable in the display, and selects
it. If the cursor is already positioned at the top-level variable, the lowest-level vari-
able is selected.
Cursor Down Moves the cursor to the next lowest, editable variable in the display, and selects
it. If the cursor is already positioned at the lowest-level variable, the top-level vari-
able is selected.
Plus 1st case: Variable is selected. The value is deleted and you can enter a new
value.
2nd case: Cursor was moved within a positive value. The value is not changed.
3rd case: Cursor was moved within a negative value. The negative sign for the
value is deleted.
Minus 1st case: Variable is selected. The value is deleted, and a negative sign is in-
serted at the least-significant position. You can enter a new value.
2nd case: Cursor was moved within a positive value. A negative sign is placed in
front of the value.
3rd case: Cursor was moved within a negative value. The value is not changed.
Delete Deletes the position where the cursor is located, and also deletes the sign.
Fig. 5-6: Key functions for decimal numbers of the type Standard