Technical data

8-2 Bosch Rexroth AG | Electric Drives and Controls Rexroth VCP-Operating Concept | R911305038 / 01
List of Figures
Fig. 5-42: Variables for example softkey. 5-115
Fig. 5-43: Control byte of the running time meter 5-117
Fig. 5-44: Reset byte of the running time meter 5-118
Fig. 5-45: Structure of the Read coordination byte 5-119
Fig. 5-46: Structure of the Write coordination byte 5-122
Fig. 5-47: Byte-oriented polling area 5-125
Fig. 5-48: Word-oriented polling area 5-126
Fig. 5-49: Truth table for a status LED 5-127
Fig. 5-50: Control Codes 5-128
Fig. 5-51: Return values from operating device 5-132
Fig. 5-52: Return values from operating device 5-132
Fig. 5-53: Image of date and time with a 4-digit year 5-139
Fig. 5-54: Image of date and time with a 2-digit year 5-139
Fig. 5-55: Text list for operating devices with a Z80-CPU or RISC-
CPU 5-140
Fig. 5-56: Default values for SER2 5-150
Fig. 5-57: Truth table for a parallel output 5-152
Fig. 5-58: Parameters for print logs 5-153
Fig. 5-59: Structure of the messages system 5-154
Fig. 5-60: System Messages 5-155
Fig. 5-61: System variables for messages 5-170
Fig. 5-62: Memory space / memory requirement 5-174
Fig. 5-63: Memory use for 500 messages 5-175
Fig. 5-64: Structure of variables for status messages with 2
bytes 5-176
Fig. 5-65: Recipe for the product 'clamp' 5-177
Fig. 5-66: Recipe for the product 'shaft' 5-177
Fig. 5-67: System variables for recipes 5-178
Fig. 5-68: Data transfer to the controller (operator-
controlled) 5-183
Fig. 5-69: Data transfer to the operating device (operator-
controlled) 5-184
Fig. 5-70: Start of file identifier 5-187
Fig. 5-71: End of file identifier 5-187
Fig. 5-72: Data set header 5-187
Fig. 5-73: Data set variables 5-187
Fig. 5-74: End of data set identifier 5-188
Fig. 5-75: Memories in operating devices in comparison 5-189
Fig. 5-76: Memory use for 500 messages in comparison 5-190
Fig. 5-77: Error message FLASH MEMORY FAILURE 5-196
Fig. 6-1: Connection set-up telegram for the 3964 procedure 6-2
Fig. 6-2: Data Request telegram for the 3964 procedure 6-3
Fig. 6-3: Data Request Telegram header for the 3964
procedure 6-4
Fig. 6-4: Specification of the data types in the "Data Request" tele-
gram header 6-4
Fig. 6-5: Response telegram for the 3964 procedure 6-5
Fig. 6-6: Data transmission telegram for the 3964 procedure 6-6
Fig. 6-7: Data transmission telegram header for the 3964
procedure 6-6
Fig. 6-8: Specifying the destination information for a write-access
via a data block 6-7
Fig. 6-9: 3964 RK512 data types 6-8
Fig. 6-10: Baud rate, 3964 RK512 6-9