Technical data

5-6 Bosch Rexroth AG | Electric Drives and Controls Rexroth VCP-Operating Concept | R911305038 / 01
Standard Mode
If the threshold value is above the view level, the operator can only dis-
play this mask if you enter the correct password.
If the threshold value is above the edit level, the operator can only
change the variables contained in the mask if you enter the correct
password.
5.4.2.3 Background Color
For each mask, you can select a separate color for the entire mask
area. All elements that may be contained in a mask cover over the
background color!
You can only use this parameter for operating devices that use gray
scales or color display.
5.4.2.4 Help Mask
You can create a specific help mask for each mask, and display it by
selecting the Help key or a corresponding button.
5.4.2.5 Variables Management Topdown
If you activate this parameter, the variables in a mask are selected in
sequence from top to bottom.
If this parameter is not activated, the variables are selected from left to
right.
5.4.2.6 Automatic Data Release
Switching to this mask automatically activates data release.
Otherwise you have to select the Data Release button to be able to
change the value of a variable.
Automatic data release cannot be used with operating devices that use
a touch screen.
5.4.2.7 Reset Password
Exiting this mask reactivates password protection. When you go back
to this mask, you must enter your password again.