Technical data

6-130 Bosch Rexroth AG | Electric Drives and Controls Rexroth VCP-Operating Concept | R911305038 / 01

PROFIBUS-DP raw

6.9.6 Error Messages

Error messages are displayed on the operating device along with a

code and subcode. Error messages are composed as follows.

Communication Error

Code XXXXX

Subcode XXXXX

Retries XXXXX

Code Subcode Error Type Possible Cause

1 Slave is currently not ready

2 Packets out of sequence

3 Protocol framing error

4 Timeout

5 CRC error

6 Parity error

7 Send process aborted

8 Receive process aborted

9 Buffer too small for cyclic data

10 No cyclic data defined

12 Cyclic data already defined

15 The selected protocol is not supported

16 Receive buffer overrun

40 Undefined system variable

50 Error initializing the SPC3

1 Buffer too large

2 No initialization of SPC3

4 No memory for telegram buffer

60 No configuration from master

61 Wrong input length

62 Wrong output length

63 Error in configuration data, reparameterization

required

Fig. 6-200: Error Messages for PROFIBUS-DP