Technical data

6-126 Bosch Rexroth AG | Electric Drives and Controls Rexroth VCP-Operating Concept | R911305038 / 01
PROFIBUS-DP raw
Address Width
Specify the address width you want the operating device to use when
accessing controller addresses.
6.9.3.2 System Parameters
Poll Area
Limits applying to the poll area:
– The variable must be word-oriented.
– The area must be contiguous.
– The controller must be able to access this area in bit-mode.
– The operating device must be able to access this area in word-mo-
de.
Configurable
Values
Default Value
1 = Byte Address
2 = Word Address X
4 = Double-Word
Address
Fig. 6-190: Address width, PROFIBUS-DP
See chapter „Word-Oriented Polling Area“ on page 5-126.