Technical data

6-124 Bosch Rexroth AG | Electric Drives and Controls Rexroth VCP-Operating Concept | R911305038 / 01
PROFIBUS-DP raw
6.9.3 Programming
6.9.3.1 Protocol Parameters
With the protocol parameters, you can adapt the communication of the
controller used.
Maximum Waiting Time for Response
Set a period of time that the operating device will wait for a response
from the controller. If the operating device does not receive a response
in this period, it will issue an error message.
Delay Until Connection Set-Up
This value specifies the time delay after which the operating device
starts the first connection setup.
Station Number
Specifies the station number of the operating device within the PROFI-
BUS-DP structure. The station numbers 0 to 2 are reserved.
Configurable
Values
Default Value
1 ms to 65535 ms 1000 ms
Fig. 6-184: Maximum waiting time for response, PROFIBUS-DP
Configurable
Values
Default Value
1000 ms to 65535 ms 5000 ms
Fig. 6-185: Delay until connection setup, PROFIBUS-DP
Configurable
Values
Default Value
3 to 124 3
Fig. 6-186: Station number, PROFIBUS-DP