Technical data

6-98 Bosch Rexroth AG | Electric Drives and Controls Rexroth VCP-Operating Concept | R911305038 / 01
DIN Measurement Bus
6.7.3 Additional Error Messages
In addition to the "normal" error messages for this connection, the gate-
way operating device displays error messages associated with its use
as a gateway. The subcode of these error messages always indicates
the error numbers of the respective communication protocol.
Error messages are displayed on the operating device along with a
code and subcode. Error messages are composed as follows.
Communication Error
Code XXXXX
Subcode XXXXX
Retries XXXXX
Code Subcode Error Tzpe Possible Cause
41 Error reading the cache from the controller
42 Error reading the gateway poll area
43 Error writing the gateway poll area
44 Wrong address syntax One of the slave terminals
contains a variable with an
address syntax which is not
compatible with the proto-
col of the gateway
45 Error writing the network status to the controller
46 No gateway parameters
Fig. 6-152: Additional error messages, DIN Measurement Bus