Technical data

R911305038 / 01 | Rexroth VCP-Operating Concept Electric Drives and Controls | Bosch Rexroth AG 6-77
DeviceNet
Select two selection fields depending on the actual byte order:
6.6.3.2 Input Syntax
The following figure illustrates the structure of the input syntax for vari-
ables in the programming software.
Fig. 6-116: Syntax diagram for DeviceNet
6.6.3.3 Variables
The variable addresses specify an offset in the data memory of the
operating device.
Configurable
Values
Default Value
Address/Length Low-
High
X
Data Low-High X
Address/Length
High-Low
Data High-Low
Fig. 6-115: Byte order
W Number
DW h Number
Variable name Address Low Byte High Byte
Word Access to Address 127 W 127
Word Access to the Highest Address W 2500
Double-Word Access to Address 371 DW 371
Double-Word Access to the Highest Address DW 2499
Bit Access to Bit 5 in Address 500 W 500 5 5
Bit Field Access to Bit 3 - Bit 12 in Address 1500 W 1500 3 12
Fig. 6-117: Addresses in the data memory of the operating device