Technical data

6-58 Bosch Rexroth AG | Electric Drives and Controls Rexroth VCP-Operating Concept | R911305038 / 01
Bosch BUEP19E
Counter: When a counter address is accessed, the counter value is interpreted
in binary form. The maximum counter value is 8191.
Timer: Timer values are made up of a time value and a time base.
The operating device reads the 2-byte variable and converts it inter-
nally into an imaginary, unsigned 4-byte variable, that represents the
time value in reference for the base 0.01 seconds.
Before the operating device writes a timer value to the controller, it con-
verts the unsigned 4-byte variable back into a 2-byte variable with a
time value for the smallest possible time base.
Data field: If you defined the data field as a linear area, the data field number must
be set to the value 255.
Data Buffer Byte BYDP Byte Access
0 to 511
Data Buffer Word WDP Word Access
0 to 511
Data Block Byte DBxBYD Byte Access
0 to 511
Data Block Word DBxWD Word Access
0 to 511
Data Block Double-
Word
DBxDWD Word Access
Data Field Byte BLxBYDF Byte Access
0 to 24575
Data Field Word BLxWDF Word Access
0 to 24575
Data Field Double-Word BLxDWDF Word Access
0 to 24575
Type Mnemonic Access
Fig. 6-89: Data types for Bosch BUEP19E