Technical data

6-56 Bosch Rexroth AG | Electric Drives and Controls Rexroth VCP-Operating Concept | R911305038 / 01
Bosch BUEP19
58 Incorrect number of data received Check if the mask, in which
the error occured, contains
a variable with an odd num-
ber of bytes which acces-
ses a word address or a
double-word address.
Error from Programmable Controller
62 32 from programmable controller Write access to T or Z to
module not allowed.
67 37 from programmable controller Wrong parameter
68 38 from programmable controller Number of bytes received
is incorrect according to
message header
69 39 from programmable controller Wrong P1 for system mes-
sage
71 41 from programmable controller Direction not defined
72 42 from programmable controller DB too small
74 44 from programmable controller DB not programmed
76 46 from programmable controller DB not defined
78 48 from programmable controller Block type unknown
79 49 from programmable controller Parameter 2 is 0
94 64 from programmable controller Wrong telegram type
Code Subcode Error Type Possible Cause
Fig. 6-88: Error Messages for Bosch BUEP19