Technical data

6-50 Bosch Rexroth AG | Electric Drives and Controls Rexroth VCP-Operating Concept | R911305038 / 01
Bosch BUEP19
Use Coordination Flag
This parameter specifies whether you are using a coordination flag for
the communication.
Coordination Flag
This parameter contains the number of the coordination flag you want
to use for the communication.
Bit Number
This parameter specifies the number of the bit in the coordination flag.
Destination Module
This parameter specifies the CPU module you are using.
Configurable
Values
Default value
OFF X
ON
Fig. 6-80: Use coordination flag, Bosch BUEP19
Configurable
Values
Default value
0 to 255 0
Fig. 6-81: Coordination flag, Bosch BUEP19
Configurable
Values
Default value
0 to 7 0
Fig. 6-82: Bit number, Bosch BUEP19
Configurable
Values
Default value
ZE300/ZE301 X
R300/R300B
R600/R600B
Fig. 6-83: Destination module, Bosch BUEP19