Technical data

R911305038 / 01 | Rexroth VCP-Operating Concept Electric Drives and Controls | Bosch Rexroth AG 6-43
IndraLogic
1. Select Options from the Project menu.
2. Select Symbol configuration.
The Options dialog will look as follows.
Fig. 6-69: Dialog 'Options' - symbol configuration
3. Select the Dump symbol entries check box.
4. Click the Configure symbol file button.
The Set object attributes window opens.
Fig. 6-70: Dialog 'Set object attributes'
5. Select the Global variables entry.
6. Click OK to confirm your selection.
You are returned to the Options dialog.
Now you need to specify the position where the symbol file is to be
stored.