Technical data

6-24 Bosch Rexroth AG | Electric Drives and Controls Rexroth VCP-Operating Concept | R911305038 / 01
3S Serial
Controllers
This parameter is reserved for future extensions.
Path for Variable List *.sym
This parameter specifies the directory in which the variable list *.sym is
stored.
To select a directory, click the Browse button.
The variable list *.sym is created by the programming software Indra-
Logic when compilation takes place.
6.2.2.2 System Parameters
Poll Area
The poll area is used to manage the write coordination byte, the serial
message channel and the LEDs in the function keys. This area is conti-
nuously polled by the operating device.
This protocol requires you to set up the poll area with three single vari-
ables.
Configurable
Values
Default Value
Standard X
PLCWinNT
Fig. 6-40: Controllers
Area Permitted Data Types
CBW BYTE
Message Channel WORD
LEDs in the Function Keys ARRAY[1..N] OF BYTE
Fig. 6-41: Dats types for the poll area