Technical data

5-198 Bosch Rexroth AG | Electric Drives and Controls Rexroth VCP-Operating Concept | R911305038 / 01
Standard Mode
5.32 Simulation Without a Controller (Demo Mode)
You can test the entire user interface for a project on the operating
device without having a controller connected. Although this simulation
permits the entry of variable values, the values are not transferred. As
a result, you can test the range limits when values are being entered.
You can also call help information for variables and masks, and test
mask changes.
No communication occurs even if you connect a controller.
See chapter “Setting the Operating Mode“ on page 5-1.