Technical data

R911305038 / 01 | Rexroth VCP-Operating Concept Electric Drives and Controls | Bosch Rexroth AG 5-193
Standard Mode
If you only specify the mask reference list by name, a reference to the
list appears in the documentation. The content of the list is not output.
You can also specify the current mask to which the system will go if the
variable value comes up that you enter in the field beside the corre-
sponding selection button.
A page feed can be inserted after each documentation element to
improve presentation.
5.30.1.2 Projects
You can select whether the documentation will take account of all ele-
ments entered in the general project information.
5.30.1.3 Masks
You can have the position of variables created in a mask documented
either in pixels or grid units. The grid unit is based on the font NOR-
MAL.
If necessary, you can display the variables of a mask with sequential
numbers. The system then specifies the variable's sequential number
in the left position of the variable frame.
You can also activate the description of a mask’s variable.
Variables for which you have not specified a documentation value are
displayed as an empty frame, if necessary.
For variables of the type Selection Text, you can output the entries of
the linked text list, if necessary.
If necessary, you can have documentation written for the functions of
the function keys in a mask.
5.30.1.4 Recipes
You can have the position of recipe elements documented either in pix-
els or grid units. The grid unit is based on the font NORMAL.
If necessary, you can display the variables of a recipe with sequential
numbers. The system then specifies the variable's sequential number
in the left position of the variable frame.
The number specified for the maximum number of text list entries must
exceed the actual number of text list entries, to ensure that the texts are
listed. This will ensure the selective documentation of all text lists in a
mask that are under a specific number of entries.