Technical data

R911305038 / 01 | Rexroth VCP-Operating Concept Electric Drives and Controls | Bosch Rexroth AG 5-191
Standard Mode
The application ID is made up of the following elements:
•ID text
• Version
•Date
•Time
• Counter
• Postfix
ID Text The ID text has up to 13 characters. This means that the file name of
the project can be entered in 8.3 format. You can edit the ID text as
required.
Version The version of the programming software has up to 5 characters. This
text cannot be changed.
Date The creation date has six characters. This text cannot be changed.
Time The time of the translation of the project is provided using six charac-
ters. This text cannot be changed.
Counter The counter has four characters and specifies the number of transla-
tion runs. This text cannot be changed.
Postfix The postfix is a random number made up of two characters. This num-
ber cannot be changed.
5.26 Version Number
You can use the version number to store any value in the operating
device.
The valid range of values is 0 to 255.
The value is saved in the system variable UserVersion.
You can output this system variable in any input/output mask.
There is no other functional link in the operating device. You cannot
change the value in the operating device.
5.27 Image of Mask Number
You can have the number of the current mask of the operating device
written to a controller variable. The controller variable must be a 16-bit
variable.
See chapter “UserVersion“ on page 5-44.