Technical data

R911305038 / 01 | Rexroth VCP-Operating Concept Electric Drives and Controls | Bosch Rexroth AG 5-179
Standard Mode
5.23.1 Structure of a Recipe
A recipe comprises a maximum of 255 variables. In addition, up to 255
explanatory texts can be programmed. The variables and texts can be
spread out over a maximum of 255 lines (with each line stretching
across the entire width of the screen). A help text can be programmed
for every variable.
The recipe is displayed in a recipe field, within an I/O mask, that
extends over the entire width of the screen. The height of the recipe
field can be as small as one line or as large as the entire height of the
screen. The Cursor keys can be used to scroll through long recipes in
the recipe field.
All one-line display formats can be used for recipe variables. Multiple-
line formats can not be used (for example, multiple-line selection fields,
tables, etc.). In addition, neither variables nor texts can be displayed
with the zoom option.
5.23.2 Working with Recipes and Data Sets
The majority of the operations described below refer to the active data
set. In order to activate a data set, first select the recipe to which it
belongs and then the data set itself. How to select recipes and data
sets is explained in the next two sections.
5.23.2.1 Selecting a Recipe
Each recipe is assigned a number from 1 to 250 when the recipes are
programmed.
You can select a recipe as follows:
• By means of a fixed assignment between the recipe and a mask. This
means, that whenever you open the corresponding mask, the recipe
field will contain the recipe that was specified when programming
was carried out. If you do not permanently assign a recipe to a mask
with a recipe field during the programming phase, the last recipe that
was processed appears when the mask is opened.
• By means of the system variable SelectRezeptNr. You can edit the
system variable using any Editor. It is a good idea, however, to use
a selection text (coded text) and assign meaningful recipe names to
each recipe number.
See chapter “SelectRezeptNr“ on page 5-84.