Technical data

5-178 Bosch Rexroth AG | Electric Drives and Controls Rexroth VCP-Operating Concept | R911305038 / 01
Standard Mode
• Variable Recipe Number for Transfer from operating device
• Variable Data Set Number for Request from controller
• Variable Recipe Number for Request from controller
• System variables:
System Vari-
able
Linked to Description
SelectDSNr Selection Text/Decimal Number Display/Select Data Set Number
SelectDSName Selection Text Variable Display/Select Data Set Names
DestDSNr Positive Decimal Number Destination Data Set Number for Copy Pro-
cess
DSCopy Softkey / Selection Text Variable Activate 'Copy Data Set'
DSDelete Softkey / Selection Text Variable Delete Data Set
DSDownload Softkey / Selection Text Variable Load Data Set in Controller
DSDnload-
Break
Softkey / Selection Text Variable Stop Data Set Transfer
DSDnloadState Selection Text Variable Display Transfer Status
ActDSName Alphanumeric Variable Enter Name for RAM Data Set
Selec-
tRezeptNr
Selection Text/Decimal Number Display/Select Recipe Number
TabPgUp Softkey Page Up
TabPgDn Softkey Page Down
Break Softkey Cancel Input
LoadDSName Selection Text Variable Display Name of Last Data Set Transferred
StartSave Softkey / Selection Text Variable Data Set Transfer from Operating Device to
PC
SaveState Selection Text Variable Display Transfer Status
StartRestore Softkey / Selection Text Variable Data Set Transfer from PC to Operating De-
vice
RestoreState Selection Text Variable Display Transfer Status
RestoreLineNr Positive Decimal Number Display Current Transfer Line
StartRezPrint Softkey / Selection Text Variable Print Active Data Set
RezPrintState Selection Text Variable Display Printer Status
StartUpload Softkey / Selection Text Variable Data Set Transfer from Controller to Operat-
ing Device
UploadDSNr Positive Decimal Number Destination Data Set Number for Upload
UploadState Selection Text Variable Display Transfer Status
Fig. 5-67: System variables for recipes