Technical data

R911305038 / 01 | Rexroth VCP-Operating Concept Electric Drives and Controls | Bosch Rexroth AG 5-165
Standard Mode
this error occurs, the memory size available in the device is specified,
in Kbytes, where "XXX" appears. This value must be specified in the
programming system when compiling.
An error message that should never occur, but which exists neverthe-
less. The terminal's operating system generates this error if proper
operation is no longer possible due to a lack of plausibility. To be able
to reproduce the incident, we need to know the code and subcode
number as well as the software versions of the operating system and
programming software. Do not hesitate to call our hotline and we will
help you.
If this error message is displayed, contact your local Bosch Rexroth
service. Before calling, make a note of the firmware and hardware ver-
sion. The operating system of the operating device switches into an
endless loop to prevent damage to the device.
A checksum error was detected when checking the memory areas of
the recipe data sets. Either the battery or the RAM memory is defec-
tive.
5.22.5 External Messages
External messages are generated by the connected controller and for-
warded to the operating terminal as information on the monitored pro-
cess. The user can choose two separate message systems.
Depending on the requirements, message transfers to the operating
device can be either serial or parallel. This is regardless of whether the
messages are process messages or fault messages.
Messages can consist of the message text and a scaled and formatted
variable. Every variable type available in the system is valid.
The information in the message memory can be used for statistical
evaluations. The message is assigned between the operating device
and the controller by means of a message number. The associated
texts and variable specifications are stored in the operating device
together with the application description. The function of a message
and its contents are determined by the user when the application
description is created in the programming system.
All of the external messages are stored in the message memory in
chronological order or in order of priority. You can optionally store par-
allel messages in the serial message memory to ensure that they are
evaluated statistically as well. If the message contains a variable, its
value will be frozen in the message memory.
5.22.5.1 Structure of an External Message
An external message is made up of the following:
• A message number from 1 to 9999