Technical data

R911305038 / 01 | Rexroth VCP-Operating Concept Electric Drives and Controls | Bosch Rexroth AG 5-161
Standard Mode
5.22.2.32 System Message 32 - Error on changing the language
The language number you want to switch to, does not exist.
5.22.2.33 System Message 33 - Flash card information
The following errors may have occurred:
• Data error while downloading a project from the Compact Flash card.
• You inserted the Compact Flash card into the operating device.
• You removed the Compact Flash card from the operating device.
You can use the system variable CFCardError to display the type of
error.
5.22.2.34 System Message 34 - New appl. necessary
The project in the operating device or the project in the controller has
been modified and the operating device is trying to access variables
that meanwhile have been modified.
5.22.3 Suppressing the Display of System Messages
You can prevent system messages from being displayed by deleting
the corresponding text. The entry of the system message in the project
management function remains existent.
Example: System message 7 - "Message buffer full" is to be suppressed. Older
messages or messages with a lower priority are to be overwritten.
Delete the system message text in the project management function.
By suppressing the display of this system message, the user agrees
that incoming messages automatically overwrite the oldest messages
or those with the lowest priority once the message buffer is full.
5.22.4 Error messages
The messages listed here are displayed by the operating system in
English. The size of the texts has been chosen in such a way that they
can be displayed on every operating device.
The text output cannot be suppressed and the texts cannot be modi-
fied. The term "error message" is used because the terminal does not
See chapter “CFCardError“ on page 5-102.