Technical data

R911305038 / 01 | Rexroth VCP-Operating Concept Electric Drives and Controls | Bosch Rexroth AG 5-159
Standard Mode
5.22.2.16 System Message 16 - Illegal data set
The data set number you specified as the destination for the data set
copy process exists already or is outside the valid range (for example,
Flash). The upload destination for a data set transfer is invalid (e. g.
zero).
5.22.2.17 System Message 17 - Data set unknown
The data set with the number you selected does not exist in the data
set list.
5.22.2.18 System Message 18 - Data set memory full
You attempted to create a new data set but the data set memory is full.
5.22.2.19 System message 19 - Data set active
You attempted to erase or to copy to the active data set, or to select a
data set even though the active data set is currently being edited.
5.22.2.20 System Message 20 - Data set transfer
You attempted to initiate a data set transfer to the controller even
though the previously initiated transfer has not yet been completed.
5.22.2.21 System Message 21 - Password missing
You attempted to switch to a password-protected mask or to edit a
password-protected mask without having entered a password with suf-
ficient authorization.
5.22.2.22 System Message 22 - Editing mode active
You attempted to change to another mask while the operating device
was in editing mode.
5.22.2.23 System Message 23 - Data set file error
The data set file loaded from the PC to the operating device contains a
syntax error. The error can be located by means of the line number
system variable.