Technical data

5-156 Bosch Rexroth AG | Electric Drives and Controls Rexroth VCP-Operating Concept | R911305038 / 01
Standard Mode
5.22.2.1 System Message 1 - Wrong format
You are attempting to enter an invalid data format into a variable field
of the numerical editor. For example, the number of places entered
before the decimal point exceeds the setting specified in the user inter-
face.
5.22.2.2 System Message 2 - Value too large
You are attempting to enter a value into a variable field of the editor
that exceeds the variable's upper limit. The upper limit is defined in the
user interface.
9 Invalid message no.
10 Print log invalid
11 Interface in use
12 Invalid password
13 Password unchanged
14 Overvoltage
15 Data set protected
16 Illegal data set
17 Data set unknown
18 Data set memory full
19 Data set active
20 Data set transfer
21 Password missing
22 Editing mode active
23 Data set file error
24 Data set format
25 Number invalid
26 Loop-through active
27 No data set address
28 Recipe unknown
29 Data set download
Number Brief Descriptions
Fig. 5-60: System Messages