Technical data

R911305038 / 01 | Rexroth VCP-Operating Concept Electric Drives and Controls | Bosch Rexroth AG 5-155
Standard Mode
The message text of the system message is displayed if you
• press the Help key or
• press a corresponding button.
For key-operated devices, the system message is displayed for the
length of time the key is pressed. For operating devices with a touch
screen, you can configure an input/output mask specifically for display-
ing system messages. The button in which the system variable State-
Help is configured can at the same time be used to change to this
mask.
If several system messages are pending at the same time, they will be
displayed in the order of their system numbers. The system message
number "1" represents the highest priority.
You can change the text of the system messages to suit you needs.
The size of one screen is available for each system message text. The
system message text can be freely designed using the terminal-spe-
cific fonts. Additional character attributes or graphics are not possible.
Icons are available for system message display on operating devices
equipped with a touch screen. This allows system messages to be dis-
played graphically.
The texts are output in a language-specific manner, i.e. if the user
interface is multilingual, the system messages are displayed in accor-
dance with the selected language. The system message assignment is
carried out by means of system message numbers. The system mes-
sage number stands for a predefined event.
A brief description consisting of 20 characters is used to provide an
explanation of the system number. The length of the texts is designed
to allow them to be displayed on one line, even on the smallest operat-
ing device's display.
A newly created system contains the following system messages with
brief descriptions:
Number Brief Descriptions
1 Wrong format
2 Value too large
3 Value too small
4 Replace battery
5 Message overflow
6 New message
7 Message buffer full
8 Invalid mask no
Fig. 5-60: System Messages