Technical data

5-144 Bosch Rexroth AG | Electric Drives and Controls Rexroth VCP-Operating Concept | R911305038 / 01
Standard Mode
See the printer documentation for more information on the escape
sequences you can define for your logging printer.
Enter the escape sequences with a unique name in a list. This list is
then available for selecting the attributes for a print log.
5.21 System Parameters
The system parameters which you can specify in the programming
software are stored in the operating device. You can set system
parameters for the following areas:
• General parameters
• Polling area
• Terminal clock
• Running time meters
• Message system
• Variant options
• Password management
• Communication SER2
• Gateway
• Data set transfer
• Parallel outputs
• Touch screen and
•Print logs
5.21.1 General Parameters
Specify a time period in seconds for the polling time of the cyclical vari-
ables. Another data exchange process with the controller takes place
after this time has elapsed.
Selecting the Enable Automatic Download check box will cause the
operating device to automatically detect and activate downloading,
without having to switch the corresponding user mode switch on the
operating device. This function can only be used if a project with this
setting has been loaded into the operating device using the standard
procedure.
The same conditions apply to the Enable automatic upload check
box.