Technical data

5-142 Bosch Rexroth AG | Electric Drives and Controls Rexroth VCP-Operating Concept | R911305038 / 01

Standard Mode

In order for the button to simulate the key function of the Help key, you

must create the Help key using the key simulation function, and link it

with the system variable KeyHelp.

5.19.4 Help Mask for Message Masks

You can only create one help mask for a mask that contains a mes-

sage field. You cannot call a help mask for any programmed input vari-

ables in the message mask.

If the operator is in a mask which contains a message field and data

release has not been requested, the help mask appears for this mask

for the length of time you select the Help key, or after he has chosen a

button that has been programmed accordingly.

In order for the button to simulate the key function of the Help key, you

must create the Help key using the key simulation function, and link it

with the system variable KeyHelp.

See chapter “KeyHelp“ on page 5-75.