Technical data

2-2 Bosch Rexroth AG | Electric Drives and Controls Rexroth VCP-Operating Concept | R911305038 / 01
Important Directions for Use
2.1.2 Areas of Use and Application
The VCP-operating concept contains hardware and project planning
software that allows to operate and control machines and installations
and serves to visualize the information about the machine/installation
to be operated required by the user.
Typical applications are:
• Handling and assembly systems
• Packaging and foodstuff machines
• Printing and paper processing machines
• Machine tools
2.2 Inappropriate Use
Applying the hardware and project planning software used in combina-
tion with the VCP operating concept outside of the above-referenced
areas of application or under operating conditions other than described
in the document and the technical data specified is defined as "inap-
propriate use".
The hardware and project planning software may not be used, if
• they are subject to operating conditions that do not meet the above
specified ambient conditions.
• Bosch Rexroth has not specifically released them for that intended
purpose. Please note the specifications outlined in the general Safe-
ty Guidelines!
Operation is only permitted in the specified configurations and combina-
tions of hardware components and with the software and firmware spec-
ified in this documentation and in the relevant project planning manuals.