Technical data

R911305038 / 01 | Rexroth VCP-Operating Concept Electric Drives and Controls | Bosch Rexroth AG 5-111
Standard Mode
Fig. 5-35: Button with horizontal layout
The following image depicts a button that has a vertical layout.
This type is activated for selection texts and selection images with sev-
eral lines.
Fig. 5-36: Button with vertical layout
5.10.3.1 Frames for Buttons
The frame for a button is created as an image that is saved in the pro-
gramming software as an image. This image is then made available by
the programming software, and you can use it for button frames.
In the following example, a frame is created that depicts a button when
it is not pressed (released state).
The image for this frame looks like this:
Fig. 5-37: Image for a basic frame
This image is made up of four subareas.